Frigidaire Dryer Error Code E11
Control board failure
The most common cause of the E11 error on a Frigidaire dryer is control board component failure (~55% of cases); start with: power cycle the dryer.
What Does Error Code E11 Mean on a Frigidaire Dryer?
Control board failure.
The dryer's electronic control board (main PCB) failed an internal self-check, so it can no longer reliably sequence the motor, heater, and sensors and the dryer may go dead or stop mid-cycle. A failed board component, often from a power surge or moisture, is the usual cause.
What Causes Error Code E11?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Control board component failure 55% of cases
- 2 Power surge damage 30% of cases
- 3 Moisture damage to board 15% of cases
How to Fix Frigidaire Dryer Error Code E11
- 1
Power cycle the dryer
Unplug the dryer for 15 minutes to fully discharge the board, then restore power and start a timed-dry cycle.
- 2
Check the power supply
Verify a stable 240V supply and tight connections at the outlet and terminal block; surges corrupt the board.
🔩 Multimeter - 3
Inspect for moisture
Look for condensation or water tracks on the board in damp laundry rooms that can short its circuits.
- 4
Replace the control board
If E11 returns after a reset, the main board has failed and must be replaced.
🔩 Frigidaire dryer control board ($100–$280)⚠️ Unplug the dryer and photograph all wiring first.
How to Reset Error Code E11
Unplug the dryer for 15 minutes so the control board fully discharges, then restore power and run a timed-dry cycle. If E11 returns, the board has an internal fault and needs replacing.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
Did this guide fix your appliance?
✓ Thanks — your feedback helps us improve this guide for the next person.
Thanks for letting us know. If the steps above didn't work, see when to call a professional.
What went wrong? (one tap helps us fix this guide)
✓ Noted — we'll use this to improve the guide.
When to Call a Professional
If a power cycle doesn't clear E11 and the supply voltage is good, the control board has failed internally — replacement is straightforward but requires photographing every wire position to avoid miswiring.
Same Code on Other Brands
Error code E11 appears on these other brands too. See every brand that shows E11 →
Find Replacement Parts
Use these links to find the exact replacement parts for your Frigidaire Dryer:
External links — ApplianceErrors.com is not affiliated with these retailers.
More Frigidaire Dryer Error Codes
Frequently Asked Questions
Can I keep using my Frigidaire Dryer when error E11 appears? +
What most commonly causes E11 on a Frigidaire Dryer? +
E11 keeps coming back after a reset — what should I check next? +
How much does it cost to fix Frigidaire Dryer error E11? +
Sources & References
- • Frigidaire Support — official manufacturer documentation
- • Our editorial & verification policy
Content verified against manufacturer service documentation. Last verified: June 10, 2026.