ApplianceErrors.com

Bosch Dishwasher Error Code E25

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧🔧 Moderate DIY

Drain pump or filter blocked — drain impeller obstructed

The most common cause of the E25 error on a Bosch dishwasher is hard debris (bone, toothpick, glass) blocking pump impeller (~55% of cases); start with: clean filter and remove impeller debris.

💰 DIY cost: $0–$130 👨‍🔧 Pro cost: $150–$280 Save $150+ by doing it yourself
Bosch Dishwasher error code E25 on the display panel
How the E25 code appears on a Bosch dishwasher display

What Does Error Code E25 Mean on a Bosch Dishwasher?

Drain pump or filter blocked — drain impeller obstructed.

E25 fires when the control board commands the drain pump but detects that water is not leaving the tub, and the fault pattern points to a physical obstruction at the pump or filter rather than the hose. The board typically senses insufficient impeller movement or continued high water level after the pump runs. This distinguishes it from E24, which implicates a kinked or clogged drain hose, and from E15, an anti-flood tray/leak trigger.

Models affected: Bosch dishwashers across most series, including models with a removable filter and self-priming drain pump such as the SHEM63W55N, SHPM65Z55N, SHXM4AY55N, SHEM3AY55N, SHP878ZD5N, and SHX878ZD5N
What owners report: Owners commonly report E25 mid-cycle with standing water at the tub bottom, often after glass breakage or a large food load. Many find the quick win is simply twisting out and rinsing the filter and fishing debris from the impeller well; false alarms sometimes clear after removing a small item lodged near the pump.

What Causes Error Code E25?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Hard debris (bone, toothpick, glass) blocking pump impeller 55% of cases
  2. 2
    Accumulated food debris in filter basket 35% of cases
  3. 3
    Drain pump motor failure 10% of cases

How to Fix Bosch Dishwasher Error Code E25

🔧🔧 Moderate DIY Est. time: 30–60 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Clean filter and remove impeller debris

    Follow the same steps as E24. Pay particular attention to clearing the pump impeller area.

    ⚠️ Use gloves when reaching into the pump area.
  2. 2

    Check pump impeller rotation

    After clearing, reach in and try to spin the pump impeller. It should rotate freely.

  3. 3

    Replace drain pump if impeller is damaged

    If impeller is broken or pump motor is seized, replace the pump assembly.

    🔩 Bosch drain pump ($60–$130)

How to Reset Error Code E25

After clearing debris, press On/Off for 3 seconds to reset then restart.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Bosch dishwasher reset guide → Enter diagnostic mode → Symptom guide: Dishwasher not draining →

Did this guide fix your appliance?

When to Call a Professional

If drain pump is replaced and E25 persists, there is a control board drain relay fault.

Average professional repair cost for this issue: $150–$280

Related Error Codes

E24
Drain blocked — dishwasher not draining
⚠ High Severity
E15
Leak protection activated — water detected in base tray
⚠ High Severity

Find Replacement Parts

Use these links to find the exact replacement parts for your Bosch Dishwasher:

🔩
Search PartSelect
Bosch Dishwasher repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Bosch Dishwasher Error Codes

E01 Heating element or NTC sensor failure — water not heating E09 Heating circuit failure — heater not functioning E05 Water shortage — insufficient water entering dishwasher E22 Residual water in the sump — filter or impeller area blocked E04 Water flow sensor fault — fill volume not being measured

Frequently Asked Questions

Can I keep using my Bosch Dishwasher when error E25 appears? +
It is not advisable. The dishwasher may still power on, but running it while E25 is active can worsen the drainage fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes E25 on a Bosch Dishwasher? +
Across reported Bosch dishwasher repairs, the most frequent is hard debris (bone, toothpick, glass) blocking pump impeller (55% of cases), accumulated food debris in filter basket (35%), then drain pump motor failure (10%). Check them in that order before replacing any parts.
E25 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E25 fault; if it returns, the drainage problem is still present. Move on to the physical checks — clean filter and remove impeller debris, then check pump impeller rotation — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.
How much does it cost to fix Bosch Dishwasher error E25? +
A DIY repair typically runs $0–$130 in parts, versus $150–$280 for a professional service call, so handling it yourself saves around $150. Expect the work to take roughly 30–60 minutes.
Which Bosch Dishwasher models show error E25? +
E25 is documented on Bosch dishwashers across most series, including models with a removable filter and self-priming drain pump such as the SHEM63W55N, SHPM65Z55N, SHXM4AY55N, SHEM3AY55N, SHP878ZD5N, and SHX878ZD5N. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Bosch Dishwasher Error Codes ← All Bosch Error Codes