ApplianceErrors.com

Bosch Dishwasher Error Code E05

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ Medium Severity 🔧 Easy DIY

Water shortage — insufficient water entering dishwasher

The most common cause of the E05 error on a Bosch dishwasher is water supply valve under sink closed or partially closed (~45% of cases); start with: check supply valve.

💰 DIY cost: $0–$80 👨‍🔧 Pro cost: $120–$250 Save $120+ by doing it yourself
Bosch Dishwasher error code E05 on the display panel
How the E05 code appears on a Bosch dishwasher display

What Does Error Code E05 Mean on a Bosch Dishwasher?

Water shortage — insufficient water entering dishwasher.

During the fill phase the control monitors flow and expected water-level rise via the flow meter and level sensing. When water arrives too slowly or not at all within the timed window, E05 fires and the cycle pauses or aborts to protect the circulation pump from running dry. Unlike leak-related codes such as E15, E05 points upstream to supply restriction — a throttled valve, kinked hose, clogged inlet mesh, or a failed inlet valve solenoid rather than water already inside the tub.

Models affected: Bosch dishwashers across the 300/500/800 and Benchmark series, including models such as SHEM63W55N, SHPM65Z55N, SHXM4AY55N, SHEM3AY55N, SHP878ZD5N, and SHX878ZD5N
What owners report: Owners commonly report E05 appearing after plumbing work under the sink or after the dishwasher has been moved, when the supply valve was left partly closed or the hose got pinched. A frequent quick win is simply reopening the shut-off valve fully, and where hard water is an issue, cleaning the small inlet mesh filter often clears it.

What Causes Error Code E05?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Water supply valve under sink closed or partially closed 45% of cases
  2. 2
    Inlet hose kinked 30% of cases
  3. 3
    Water inlet valve solenoid failure 15% of cases
  4. 4
    Inlet mesh filter blocked with scale 10% of cases

How to Fix Bosch Dishwasher Error Code E05

🔧 Easy DIY Est. time: 10–20 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Check supply valve

    Confirm under-sink valve is fully open.

  2. 2

    Inspect inlet hose

    Check for kinks from the wall to the dishwasher.

  3. 3

    Clean inlet mesh filter

    Unscrew the hose from the dishwasher and clean the small mesh filter inside the inlet port.

  4. 4

    Test and replace inlet valve

    Test solenoid for continuity. Should read 200–500 ohms.

    🔩 Bosch inlet valve ($40–$80)

How to Reset Error Code E05

Restore water supply and press Start to resume.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Bosch dishwasher reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

If water supply is confirmed good and error persists, inlet valve replacement is needed.

Average professional repair cost for this issue: $120–$250

Find Replacement Parts

Use these links to find the exact replacement parts for your Bosch Dishwasher:

🔩
Search PartSelect
Bosch Dishwasher repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Bosch Dishwasher Error Codes

E15 Leak protection activated — water detected in base tray E24 Drain blocked — dishwasher not draining E25 Drain pump or filter blocked — drain impeller obstructed E01 Heating element or NTC sensor failure — water not heating E09 Heating circuit failure — heater not functioning E22 Residual water in the sump — filter or impeller area blocked

Frequently Asked Questions

Can I keep using my Bosch Dishwasher when error E05 appears? +
You often can for a cycle or two, but the water-supply issue behind E05 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes E05 on a Bosch Dishwasher? +
Across reported Bosch dishwasher repairs, the most frequent is water supply valve under sink closed or partially closed (45% of cases), inlet hose kinked (30%), then water inlet valve solenoid failure (15%). Check them in that order before replacing any parts.
E05 keeps coming back after a reset — what should I check next? +
A reset only clears the stored E05 fault; if it returns, the water-supply problem is still present. Move on to the physical checks — check supply valve, then inspect inlet hose — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Bosch Dishwasher error E05? +
A DIY repair typically runs $0–$80 in parts, versus $120–$250 for a professional service call, so handling it yourself saves around $120. Expect the work to take about 10–20 minutes.
Which Bosch Dishwasher models show error E05? +
E05 is documented on Bosch dishwashers across the 300/500/800 and Benchmark series, including models such as SHEM63W55N, SHPM65Z55N, SHXM4AY55N, SHEM3AY55N, SHP878ZD5N, and SHX878ZD5N. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Bosch Dishwasher Error Codes ← All Bosch Error Codes