Amana Washing Machine Error Code F9E1

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026

⚠ High Severity 🔧🔧 Moderate DIY

Drain failure — cycle cannot complete

The most common cause of the F9E1 error on a Amana washing machine is clogged drain pump filter (~50% of cases); start with: clean the drain pump filter.

💰 DIY cost: $0–$90 👨‍🔧 Pro cost: $150–$280 Save $150+ by doing it yourself

Amana Washing Machine error code F9E1 on the display panel — How the F9E1 code appears on a Amana washing machine display

What Does Error Code F9E1 Mean on a Amana Washing Machine?

Drain failure — cycle cannot complete.

Amana washers are built on the Whirlpool platform, so F9E1 means the washer ran the drain step but couldn't empty the tub within the allowed time, leaving standing water. A clogged drain pump filter is the most common cause and clears without any parts.

What Causes Error Code F9E1?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Clogged drain pump filter 50% of cases
2

Kinked drain hose 25% of cases
3

Clogged standpipe 15% of cases
4

Failed drain pump 10% of cases

How to Fix Amana Washing Machine Error Code F9E1

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Clean the drain pump filter

Open the lower-front access panel, set out towels and a pan, then slowly unscrew the filter cap to drain water and clear debris.

⚠️ Have towels ready — water will spill.
2

Check the drain hose

Confirm the hose isn't kinked, keeps a proper high loop, and isn't pushed too far into the standpipe.
3

Check the household drain

Verify the standpipe or sink drain the hose empties into isn't clogged or backing up.
4

Test the drain pump

If the filter and hoses are clear, test the pump motor for continuity and listen for it running during drain.

🔩 Amana drain pump ($40–$90)

How to Reset Error Code F9E1

Clear the blockage, reseat the filter cap fully, then select Drain & Spin and press Start — F9E1 clears once the washer empties the tub within the expected time.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Symptom guide: Washer won't drain →

Did this guide fix your appliance?

When to Call a Professional

If the filter, hoses, and household drain are all clear but F9E1 returns, the drain pump or the control board's pump relay has likely failed and a technician should test both.

Average professional repair cost for this issue: $150–$280

Related Error Codes

SUD

Excessive suds

✓ Low Severity

Same Code on Other Brands

Error code F9E1 appears on these other brands too. See every brand that shows F9E1 →

Whirlpool Washing Machine F9E1

Drain failure — cycle paused, water not draining

Whirlpool Dishwasher F9E1

Drain pump failure — dishwasher not draining

KitchenAid Washing Machine F9E1

Drain failure — water not draining

Maytag Washing Machine F9E1

Drain failure — water not draining

Find Replacement Parts

Use these links to find the exact replacement parts for your Amana Washing Machine:

🔩

Search PartSelect

Amana Washing Machine repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Amana Washing Machine Error Codes

F8E1 Low water supply

Frequently Asked Questions

Can I keep using my Amana Washing Machine when error F9E1 appears? +

It is not advisable. The washing machine may still power on, but running it while F9E1 is active can worsen the drainage fault or damage related parts. Treat it as a soon-as-possible repair.

What most commonly causes F9E1 on a Amana Washing Machine? +

Across reported Amana washing machine repairs, the most frequent is clogged drain pump filter (50% of cases), kinked drain hose (25%), then clogged standpipe (15%). Check them in that order before replacing any parts.

F9E1 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F9E1 fault; if it returns, the drainage problem is still present. Move on to the physical checks — clean the drain pump filter, then check the drain hose — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Amana Washing Machine error F9E1? +

A DIY repair typically runs $0–$90 in parts, versus $150–$280 for a professional service call, so handling it yourself saves around $150. Expect the work to take roughly 30–60 minutes.

Sources & References

• Amana Product Help — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Amana Washing Machine Error Codes ← All Amana Error Codes