ApplianceErrors.com

Amana Washing Machine Error Code F8E1

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ Medium Severity 🔧 Easy DIY

Low water supply

The most common cause of the F8E1 error on a Amana washing machine is supply valve closed (~40% of cases); start with: check supply valves.

💰 DIY cost: $0–$70 👨‍🔧 Pro cost: $150–$280 Save $150+ by doing it yourself
Amana Washing Machine error code F8E1 on the display panel
How the F8E1 code appears on a Amana washing machine display

What Does Error Code F8E1 Mean on a Amana Washing Machine?

Low water supply.

F8E1 fires when the control energizes the fill valve but the pressure sensor fails to register the expected water level within the allotted fill window. The board interprets the slow or absent rise as a low water supply and pauses or aborts the cycle. This differs from a drain or pressure-sensor fault code in that it points specifically at inadequate incoming water — a throttled valve, restricted inlet screens, weak household pressure, or a failing inlet valve solenoid — rather than a control or sensing failure alone.

Models affected: Amana top-load washers using the F8E1 fill-detection code, including the NTW4516FW
What owners report: Owners commonly report this code showing up after a plumbing repair or when a shutoff valve was left only partly open. It can also be a false alarm during periods of low household water pressure, and many find that simply fully opening both valves and rinsing the inlet screens clears it.

What Causes Error Code F8E1?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Supply valve closed 40% of cases
  2. 2
    Inlet screens clogged 30% of cases
  3. 3
    Low water pressure 20% of cases
  4. 4
    Inlet valve failure 10% of cases

How to Fix Amana Washing Machine Error Code F8E1

🔧 Easy DIY Est. time: 10–20 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Check supply valves

    Both valves fully open.

  2. 2

    Clean inlet screens

    Clean mesh screens at washer inlet ports.

  3. 3

    Test inlet valve

    Test solenoid continuity.

    🔩 Amana inlet valve ($30–$70)

How to Reset Error Code F8E1

Open both supply valves fully and check the hoses for kinks, then unplug the washer for 60 seconds. Plug back in and press Start — F8E1 clears once the washer detects a normal fill.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Symptom guide: Washer not filling →

Did this guide fix your appliance?

When to Call a Professional

If supply good and error persists, inlet valve replacement needed.

Average professional repair cost for this issue: $150–$280

Related Error Codes

F9E1
Drain failure — cycle cannot complete
⚠ High Severity

Same Code on Other Brands

Error code F8E1 appears on these other brands too. See every brand that shows F8E1 →

Whirlpool logo
Whirlpool Washing Machine F8E1
Low water fill detected — water inlet problem
Whirlpool logo
Whirlpool Dishwasher F8E1
No / low water fill — slow or insufficient fill
KitchenAid logo
KitchenAid Washing Machine F8E1
Low water supply — insufficient fill detected
Maytag logo
Maytag Washing Machine F8E1
Low water fill detected

Find Replacement Parts

Use these links to find the exact replacement parts for your Amana Washing Machine:

🔩
Search PartSelect
Amana Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Amana Washing Machine Error Codes

SUD Excessive suds

Frequently Asked Questions

Can I keep using my Amana Washing Machine when error F8E1 appears? +
You often can for a cycle or two, but the water-supply issue behind F8E1 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes F8E1 on a Amana Washing Machine? +
Across reported Amana washing machine repairs, the most frequent is supply valve closed (40% of cases), inlet screens clogged (30%), then low water pressure (20%). Check them in that order before replacing any parts.
F8E1 keeps coming back after a reset — what should I check next? +
A reset only clears the stored F8E1 fault; if it returns, the water-supply problem is still present. Move on to the physical checks — check supply valves, then clean inlet screens — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Amana Washing Machine error F8E1? +
A DIY repair typically runs $0–$70 in parts, versus $150–$280 for a professional service call, so handling it yourself saves around $150. Expect the work to take about 10–20 minutes.
Which Amana Washing Machine models show error F8E1? +
F8E1 is documented on Amana top-load washers using the F8E1 fill-detection code, including the NTW4516FW. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Amana Washing Machine Error Codes ← All Amana Error Codes