ApplianceErrors.com

GE Appliances Oven Error Code FC

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ Medium Severity 🔧🔧 Moderate DIY

Door lock circuit failure — fault in the self-clean latch circuit

💰 DIY cost: $50–$130 👨‍🔧 Pro cost: $200–$420 Save $150+ by doing it yourself
GE Appliances Oven error code FC on the display panel
How the FC code appears on a GE Appliances oven display

What Does Error Code FC Mean on a GE Appliances Oven?

Door lock circuit failure — fault in the self-clean latch circuit.

The control detected a problem somewhere in the oven door-lock circuit — the latch motor, lock switches, or wiring sending conflicting signals. The door may be stuck locked, often after a self-clean cycle.

What Causes Error Code FC?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Door latch motor or lock switch failed 45% of cases
  2. 2
    Latch jammed by debris or thermal binding 25% of cases
  3. 3
    Wiring/connector to the latch faulted 20% of cases
  4. 4
    ERC door-lock relay failed 10% of cases

How to Fix GE Appliances Oven Error Code FC

🔧🔧 Moderate DIY Est. time: 30–60 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle the oven

    Turn off the circuit breaker 5 minutes; let the oven cool fully if it just self-cleaned.

  2. 2

    Clean around the latch

    Clear food debris that can jam the latch mechanism.

  3. 3

    Test and replace the latch assembly

    Test the lock motor/switches; replace the latch assembly if faulty.

    🔩 GE oven door latch assembly ($50–$130)
    ⚠️ Unplug the oven before accessing the latch.

How to Reset Error Code FC

Power cycle for 5 minutes after the oven cools. If FC returns, service the door-lock circuit.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

If the latch and switches test good but FC persists, the ERC door-lock relay has failed.

Average professional repair cost for this issue: $200–$420

Related Error Codes

F9
Door latch failure — self-clean lock not completing
⚠ Medium Severity
F1
Electronic control (ERC) failure — loss of element relay backup protection
⚠ High Severity

Find Replacement Parts

Use these links to find the exact replacement parts for your GE Appliances Oven:

🔩
Search PartSelect
GE Appliances Oven repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More GE Appliances Oven Error Codes

F0 Keypad stuck — a button is continuously pressed F2 Oven over-temperature — exceeded 590°F in bake or 990°F in self-clean F3 Oven temperature sensor open circuit F4 Oven temperature sensor short circuit F7 Touchpad/membrane key button fault F8 Electronic Range Control internal fault

Frequently Asked Questions

Can I keep using my GE Appliances Oven when error FC appears? +
You often can for a cycle or two, but the door issue behind FC will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes FC on a GE Appliances Oven? +
Across reported GE Appliances oven repairs, the most frequent is door latch motor or lock switch failed (45% of cases), latch jammed by debris or thermal binding (25%), then wiring/connector to the latch faulted (20%). Check them in that order before replacing any parts.
FC keeps coming back after a reset — what should I check next? +
A reset only clears the stored FC fault; if it returns, the door problem is still present. Move on to the physical checks — power cycle the oven, then clean around the latch — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.
How much does it cost to fix GE Appliances Oven error FC? +
A DIY repair typically runs $50–$130 in parts, versus $200–$420 for a professional service call, so handling it yourself saves around $150. Expect the work to take roughly 30–60 minutes.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All GE Appliances Oven Error Codes ← All GE Appliances Error Codes