GE Appliances Oven Error Code F0

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026

✓ Low Severity 🔧🔧 Moderate DIY

Keypad stuck — a button is continuously pressed

The most common cause of the F0 error on a GE Appliances oven is membrane keypad failure (~55% of cases); start with: clean the keypad.

💰 DIY cost: $60–$160 👨‍🔧 Pro cost: $150–$320 Save $90+ by doing it yourself

GE Appliances Oven error code F0 on the display panel — How the F0 code appears on a GE Appliances oven display

What Does Error Code F0 Mean on a GE Appliances Oven?

Keypad stuck — a button is continuously pressed.

F0 fires when the electronic control interprets a signal from the touch pad as a single button held continuously for roughly 60 seconds or more. The membrane's traces short or bridge, so the ERC reads a constant keypress and locks out other commands. Unlike F7 — which also flags a stuck-key or key-shorted condition on some GE controls — F0 specifically points to one button reading as permanently depressed, most often from a worn membrane, spilled residue under a key, or a failing touch interface.

Models affected: GE Profile, GE Café, and standard GE electric and gas ranges (including models such as JB645RKSS and JGB735SPSS)

What owners report: Owners commonly report F0 appearing during cooking or shortly after cleaning around the buttons, sometimes with a repeating beep. A quick breaker power cycle and wiping any grease from around the keys often clears it; when the code returns quickly, the membrane itself is usually the culprit.

What Causes Error Code F0?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Membrane keypad failure 55% of cases
2

Food/grease buildup under key 30% of cases
3

ERC board touch interface failure 15% of cases

How to Fix GE Appliances Oven Error Code F0

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Clean the keypad

Wipe around all control pad buttons with a barely-damp cloth. Dry completely before restoring power.
2

Power cycle

Turn off the circuit breaker for 5 minutes. F0 clears on many GE ovens after power cycling.
3

Replace the control panel/membrane

If F0 returns after cleaning and cycling, the membrane has failed.

🔩 GE oven touchpad ($60–$160)

How to Reset Error Code F0

Turn off circuit breaker 5 minutes. Wipe panel clean. If F0 returns, replace touchpad.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full GE Appliances oven reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

If new touchpad and F0 persists, the ERC (Electronic Range Control) board has failed.

Average professional repair cost for this issue: $150–$320

Related Error Codes

Touchpad/membrane key button fault

✓ Low Severity

Same Code on Other Brands

Error code F0 appears on these other brands too. See every brand that shows F0 →

Whirlpool Oven F0

Control board failure

Maytag Oven F0

Electronic Range Control (ERC) failure — failed transistor/control board

Find Replacement Parts

Use these links to find the exact replacement parts for your GE Appliances Oven:

🔩

Search PartSelect

GE Appliances Oven repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More GE Appliances Oven Error Codes

F2 Oven over-temperature — exceeded 590°F in bake or 990°F in self-clean F3 Oven temperature sensor open circuit F4 Oven temperature sensor short circuit F8 Electronic Range Control internal fault F9 Door latch failure — self-clean lock not completing F1 Electronic control (ERC) failure — loss of element relay backup protection

Frequently Asked Questions

Can I keep using my GE Appliances Oven when error F0 appears? +

Usually yes — F0 is a low-severity control-panel notice that rarely stops the oven from working, but clearing the underlying cause prevents it from escalating.

What most commonly causes F0 on a GE Appliances Oven? +

Across reported GE Appliances oven repairs, the most frequent is membrane keypad failure (55% of cases), food/grease buildup under key (30%), then eRC board touch interface failure (15%). Check them in that order before replacing any parts.

F0 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F0 fault; if it returns, the control-panel problem is still present. Move on to the physical checks — clean the keypad, then power cycle — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix GE Appliances Oven error F0? +

A DIY repair typically runs $60–$160 in parts, versus $150–$320 for a professional service call, so handling it yourself saves around $90. Expect the work to take roughly 30–60 minutes.

Which GE Appliances Oven models show error F0? +

F0 is documented on GE Profile, GE Café, and standard GE electric and gas ranges (including models such as JB645RKSS and JGB735SPSS). Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• GE Appliances Support — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All GE Appliances Oven Error Codes ← All GE Appliances Error Codes