How to Reset a Bosch Washing Machine
Power-cycle for 60 seconds; turn the program dial to Off first.
Reset Steps
- 1
Turn the program selector to Off.
- 2
Unplug for 60 seconds, plug back in.
- 3
Run Rinse/Spin to confirm the code is gone.
💡 Good to know: Codes return immediately if the filter or screens are still blocked — the control re-tests on every cycle start.
If the Code Comes Back
A code that returns after a reset means the underlying fault is still present. Look up your exact code for its causes and step-by-step fix:
E18 Drain time exceeded — water not draining within expected time E02 Door lock failure — cannot lock door for cycle E17 Water intake fault — fill time exceeded E04 Anti-flood device activated — water detected in base F01 Water intake timeout — machine failed to fill within the expected time F02 Heating timeout — water did not reach the target temperature F03 Drain timeout — water did not drain within the expected time F04 Motor fault — drive motor not running correctly
Frequently Asked Questions
Where is the drain filter on a Bosch compact washer? +
Behind the small access door at the lower right of the front panel. Put towels down — a full drum's worth of water can be behind it. Unscrew counterclockwise slowly.