Amana Dryer Error Code F01
Control board failure
The most common cause of the F01 error on a Amana dryer is board component failure (~55% of cases); start with: check the circuit breaker.
What Does Error Code F01 Mean on a Amana Dryer?
Control board failure.
The main electronic control board failed its internal self-check, so the dryer halts and won't respond normally. A failed onboard component (relay or capacitor) is the usual root cause, often triggered by a power surge — sometimes a long power cycle clears a transient fault.
What Causes Error Code F01?
Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:
- 1 Board component failure 55% of cases
- 2 Power surge 30% of cases
- 3 Moisture 15% of cases
How to Fix Amana Dryer Error Code F01
- 1
Check the circuit breaker
Confirm the dryer has full 240V power — a half-tripped double-pole breaker can mimic a control board fault.
- 2
Power cycle the dryer
Unplug the dryer (or switch off its breaker) for 15 minutes, then restore power to clear a transient control fault.
- 3
Reseat board connectors
Unplug the dryer and reseat the wiring connectors on the control board; loose or corroded pins can trigger F01.
⚠️ Unplug before servicing. - 4
Replace the control board
If F01 returns after a power cycle, the main control board has failed and needs replacement.
🔩 Amana dryer control board ($90–$250)⚠️ Photograph all wiring before disconnecting.
How to Reset Error Code F01
Unplug the dryer for a full 15 minutes (or switch off the breaker) so the control board fully discharges, then restore power. If F01 returns right away, the board has failed and needs replacement.
Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.
Did this guide fix your appliance?
✓ Thanks — your feedback helps us improve this guide for the next person.
Thanks for letting us know. If the steps above didn't work, see when to call a professional.
What went wrong? (one tap helps us fix this guide)
✓ Noted — we'll use this to improve the guide.
When to Call a Professional
If F01 returns after a power cycle and connector check, or appears on a new control board, have a technician test the incoming power supply and wiring harness before assuming the board is at fault.
Same Code on Other Brands
Error code F01 appears on these other brands too. See every brand that shows F01 →
Find Replacement Parts
Use these links to find the exact replacement parts for your Amana Dryer:
External links — ApplianceErrors.com is not affiliated with these retailers.
More Amana Dryer Error Codes
Frequently Asked Questions
Can I keep using my Amana Dryer when error F01 appears? +
What most commonly causes F01 on a Amana Dryer? +
F01 keeps coming back after a reset — what should I check next? +
How much does it cost to fix Amana Dryer error F01? +
Sources & References
- • Amana Product Help — official manufacturer documentation
- • Our editorial & verification policy
Content verified against manufacturer service documentation. Last verified: June 10, 2026.