ApplianceErrors.com

Miele Washing Machine Error Code F45

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026
⚠ High Severity 👨‍🔧 Call a Pro

Defective Flash RAM — incorrect data supplied

The most common cause of the F45 error on a Miele washing machine is flash RAM failure (~60% of cases); start with: power cycle.

💰 DIY cost: $0–$0 👨‍🔧 Pro cost: $250–$550 Save $250+ by doing it yourself
Miele Washing Machine error code F45 on the display panel
How the F45 code appears on a Miele washing machine display

What Does Error Code F45 Mean on a Miele Washing Machine?

Defective Flash RAM — incorrect data supplied.

F45 fires when the control board's self-check finds that its Flash RAM is returning incorrect or unreadable data. The processor relies on this memory to hold firmware and operating parameters, so corrupted reads force the machine to halt rather than run on bad data. Unlike F41 and F43, which also point to internal electronic-unit faults, F45 specifically flags the non-volatile Flash memory. It is not a mechanical, sensor, or wiring fault, which is why reflashing or board replacement is usually required.

Models affected: Miele W1 Series front-load washers, and broadly other electronically controlled Miele washers using the same main electronic unit
What owners report: Owners commonly report F45 appearing suddenly, sometimes after a power flicker or interrupted cycle rather than any obvious washer problem. A quick win many mention is switching off at the wall for several minutes, which occasionally clears a one-off glitch; if it returns, Miele service and board reflashing are typically needed.

What Causes Error Code F45?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Flash RAM failure 60% of cases
  2. 2
    Firmware corrupted 25% of cases
  3. 3
    Power disturbance during write 15% of cases

How to Fix Miele Washing Machine Error Code F45

👨‍🔧 Call a Pro Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle

    Switch off at the wall for several minutes to attempt a clear.

  2. 2

    Board diagnosis/replacement

    Persistent F45 means the electronic unit needs reflashing or replacement by Miele.

    🔩 Miele control board ($150–$350)

How to Reset Error Code F45

Switch off several minutes and restart. If F45 persists, the control unit needs service.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

Flash RAM faults require Miele service — reflashing/coding is model-specific.

Average professional repair cost for this issue: $250–$550

Related Error Codes

F39
Electronic unit fault — main control failure
⚠ High Severity
F41
Faulty electronic memory — incorrect data
⚠ High Severity
F43
Appliance model not programmed
⚠ High Severity

Find Replacement Parts

Use these links to find the exact replacement parts for your Miele Washing Machine:

🔩
Search PartSelect
Miele Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Miele Washing Machine Error Codes

F11 Pump fault — water not draining F19 Drain time exceeded — slow or failed drain F16 Water protection system activated — flood protection triggered F53 Motor fault — drive motor failure F31 NTC temperature sensor fault F1 NTC temperature sensor short-circuited

Frequently Asked Questions

Can I keep using my Miele Washing Machine when error F45 appears? +
It is not advisable. The washing machine may still power on, but running it while F45 is active can worsen the control fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes F45 on a Miele Washing Machine? +
Across reported Miele washing machine repairs, the most frequent is flash RAM failure (60% of cases), firmware corrupted (25%), then power disturbance during write (15%). Check them in that order before replacing any parts.
F45 keeps coming back after a reset — what should I check next? +
A reset only clears the stored F45 fault; if it returns, the control problem is still present. Move on to the physical checks — power cycle, then board diagnosis/replacement — since the code will reappear until the root cause is resolved. This is a repair most owners hand to a technician.
How much does it cost to fix Miele Washing Machine error F45? +
A DIY repair typically runs $0–$0 in parts, versus $250–$550 for a professional service call, so handling it yourself saves around $250. Expect the work to take a full service visit.
Which Miele Washing Machine models show error F45? +
F45 is documented on Miele W1 Series front-load washers, and broadly other electronically controlled Miele washers using the same main electronic unit. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All Miele Washing Machine Error Codes ← All Miele Error Codes