Miele Refrigerator Error Code F2

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026

⚠ High Severity 👨‍🔧 Call a Pro

Evaporator sensor fault

The most common cause of the F2 error on a Miele refrigerator is failed evaporator sensor (~55% of cases); start with: power-reset.

💰 DIY cost: $0–$0 👨‍🔧 Pro cost: $220–$420 Save $220+ by doing it yourself

Miele Refrigerator error code F2 on the display panel — How the F2 code appears on a Miele refrigerator display

What Does Error Code F2 Mean on a Miele Refrigerator?

Evaporator sensor fault.

F2 indicates the control board is reading the evaporator coil temperature sensor (NTC thermistor) as open-circuit, shorted, or outside its plausible resistance range. Because this sensor governs when the automatic defrost heater runs, a bad reading disrupts defrost timing and lets frost accumulate on the coil, choking airflow and weakening cooling. Unlike F1 or F3, which track other temperature sensors, F2 points specifically at the evaporator probe or its wiring buried behind the cooling-compartment panels.

Models affected: Miele refrigerators and fridge-freezers with electronic control and automatic defrost, spanning built-in and freestanding models across recent generations

What owners report: Owners commonly report F2 appearing alongside gradually weaker cooling, louder fan noise, or a sheet of frost on the rear interior wall. A brief power-off reset sometimes clears a transient fault, but if it returns the sensor or its ice-damaged wiring usually needs service; a manual defrost often restores cooling temporarily in the meantime.

What Causes Error Code F2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Failed evaporator sensor 55% of cases
2

Frost/ice damage to sensor wiring 25% of cases
3

Connector fault 20% of cases

How to Fix Miele Refrigerator Error Code F2

👨‍🔧 Call a Pro Est. time: 1–3 hours

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Power-reset

Switch off for 60 seconds and back on.
2

Check for icing symptoms

Weak cooling, a rear interior wall of frost, or a fan working loudly all suggest the defrost timing has already been affected.
3

Book service

Evaporator sensor access requires opening the cooling-compartment panels — an authorized-service job on Miele units.

How to Reset Error Code F2

Switch the appliance off for 60 seconds and back on. If cooling is already weak, a full manual defrost (unit off, doors open, 24h) restores temporary performance until service.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

Evaporator-side work on Miele refrigeration is authorized-service territory. If cooling has degraded, don't delay — running iced-up stresses the compressor.

Average professional repair cost for this issue: $220–$420

Related Error Codes

Refrigerator compartment sensor fault

⚠ Medium Severity

Freezer compartment air sensor fault

⚠ High Severity

Same Code on Other Brands

Error code F2 appears on these other brands too. See every brand that shows F2 →

LG Oven F2

Oven over-temperature — exceeded maximum safe temperature

Whirlpool Dryer F02

Keypad / user interface fault — stuck key detected

Whirlpool Oven F2

Oven temperature too high — over-temperature fault

GE Appliances Oven F2

Oven over-temperature — exceeded 590°F in bake or 990°F in self-clean

Find Replacement Parts

Use these links to find the exact replacement parts for your Miele Refrigerator:

🔩

Search PartSelect

Miele Refrigerator repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Miele Refrigerator Error Codes

F4 Fan motor fault

Frequently Asked Questions

Can I keep using my Miele Refrigerator when error F2 appears? +

It is not advisable. The refrigerator may still power on, but running it while F2 is active can worsen the sensor fault or damage related parts. Treat it as a soon-as-possible repair.

What most commonly causes F2 on a Miele Refrigerator? +

Across reported Miele refrigerator repairs, the most frequent is failed evaporator sensor (55% of cases), frost/ice damage to sensor wiring (25%), then connector fault (20%). Check them in that order before replacing any parts.

F2 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F2 fault; if it returns, the sensor problem is still present. Move on to the physical checks — power-reset, then check for icing symptoms — since the code will reappear until the root cause is resolved. This is a repair most owners hand to a technician.

How much does it cost to fix Miele Refrigerator error F2? +

A DIY repair typically runs $0–$0 in parts, versus $220–$420 for a professional service call, so handling it yourself saves around $220. Expect the work to take a full service visit.

Which Miele Refrigerator models show error F2? +

F2 is documented on Miele refrigerators and fridge-freezers with electronic control and automatic defrost, spanning built-in and freestanding models across recent generations. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Miele Customer Support — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All Miele Refrigerator Error Codes ← All Miele Error Codes