ApplianceErrors.com

LG Washing Machine Error Code EE

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ Medium Severity 🔧🔧🔧 Advanced DIY

EEPROM error — control board memory failure

The most common cause of the EE error on a LG washing machine is eEPROM chip failed or corrupted (~55% of cases); start with: power cycle the washer.

💰 DIY cost: $120–$280 👨‍🔧 Pro cost: $250–$480 Save $130+ by doing it yourself
LG Washing Machine error code EE on the display panel
How the EE code appears on a LG washing machine display

What Does Error Code EE Mean on a LG Washing Machine?

EEPROM error — control board memory failure.

EE indicates the main control board cannot reliably read from or write to its onboard EEPROM, the non-volatile memory holding model configuration, cycle history, and calibration values. When a checksum or read/write verification fails, the board flags EE and may halt, restart, or throw erratic secondary errors. Unlike sensor codes tied to a single component, EE points at the board's own memory, so it usually persists after resets and is not corrected by servicing motors, valves, or drain parts.

Models affected: LG top-load and front-load washers with electronic control boards; the fault is board-level and not tied to a specific model, though it can appear on any current LG washer
What owners report: Owners commonly report EE appearing suddenly after a storm, brownout, or power flicker, and a long unplug sometimes clears a one-off memory glitch. When it returns after that full discharge, it usually signals a genuine board fault rather than a false trigger.

What Causes Error Code EE?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    EEPROM chip failed or corrupted 55% of cases
  2. 2
    Voltage spike or outage corrupted memory 25% of cases
  3. 3
    Aging main control board 15% of cases
  4. 4
    Loose control-board connector causing resets 5% of cases

How to Fix LG Washing Machine Error Code EE

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle the washer

    Unplug for 15 minutes so the control fully discharges, then restart and watch whether EE returns.

  2. 2

    Check control connectors

    With power off, reseat the harnesses at the main board; intermittent power to the board can mimic memory faults.

    ⚠️ Unplug the washer before accessing the control board.
  3. 3

    Replace the main control board

    If EE returns after a long reset, replace the control board because the EEPROM is not serviceable separately.

    🔩 LG washer control board ($120–$280)

How to Reset Error Code EE

Unplug the washer for 15 minutes to let the board fully discharge, then restore power and start a simple rinse/spin cycle; if EE returns, the EEPROM fault is stored in the main control board and will not be fixed by more resets.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full LG washer reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

Call a technician if EE returns after the long power reset or after reseating the board connectors, because the repair requires matching and replacing the correct main control board rather than swapping a separate memory chip.

Average professional repair cost for this issue: $250–$480

Find Replacement Parts

Use these links to find the exact replacement parts for your LG Washing Machine:

🔩
Search PartSelect
LG Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More LG Washing Machine Error Codes

OE Drainage error — water not draining within expected time UE Unbalanced load — cannot complete spin cycle IE Water inlet error — water not filling within expected time LE Motor locked — hall sensor or stator fault dE Door open or door lock failure tCL Tub clean reminder — drum needs cleaning

Frequently Asked Questions

Can I keep using my LG Washing Machine when error EE appears? +
You often can for a cycle or two, but the control-board issue behind EE will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes EE on a LG Washing Machine? +
Across reported LG washing machine repairs, the most frequent is eEPROM chip failed or corrupted (55% of cases), voltage spike or outage corrupted memory (25%), then aging main control board (15%). Check them in that order before replacing any parts.
EE keeps coming back after a reset — what should I check next? +
A reset only clears the stored EE fault; if it returns, the control-board problem is still present. Move on to the physical checks — power cycle the washer, then check control connectors — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.
How much does it cost to fix LG Washing Machine error EE? +
A DIY repair typically runs $120–$280 in parts, versus $250–$480 for a professional service call, so handling it yourself saves around $130. Expect the work to take 1–3 hours.
Which LG Washing Machine models show error EE? +
EE is documented on LG top-load and front-load washers with electronic control boards; the fault is board-level and not tied to a specific model, though it can appear on any current LG washer. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All LG Washing Machine Error Codes ← All LG Error Codes