ApplianceErrors.com

LG Washing Machine Error Code CE

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
⚠ High Severity 🔧🔧🔧 Advanced DIY

Over-current error — motor drawing too much current

The most common cause of the CE error on a LG washing machine is hall sensor failure causing incorrect current feedback (~40% of cases); start with: reduce load.

💰 DIY cost: $15–$200 👨‍🔧 Pro cost: $250–$480 Save $235+ by doing it yourself
LG Washing Machine error code CE on the display panel
How the CE code appears on a LG washing machine display

What Does Error Code CE Mean on a LG Washing Machine?

Over-current error — motor drawing too much current.

CE fires when the motor control board reads current above its safe threshold on the direct-drive motor circuit. The board shuts down mid-cycle to protect the motor and electronics. Because LG's stator uses a hall sensor to report rotor position and speed, a faulty sensor sends bad feedback that the board misreads as an over-current condition. This distinguishes CE from LE (locked/overloaded motor) and SE (stator/sensor communication), though overloading and winding faults can also trigger it.

Models affected: LG direct-drive front-load and top-load washers, including models such as WM3900HWA, WM4000HBA, WM4500HBA, WM3400CW, WT7300CW, WT7900HBA, and WM8100HVA
What owners report: Owners commonly report CE appearing during the spin or high-speed phase, often after adding a heavy or unbalanced load. A false trigger from an oversized wash is frequent, so many find that splitting the load and power-cycling clears it; when it keeps returning, the inexpensive hall sensor is the fix people most often mention.

What Causes Error Code CE?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Hall sensor failure causing incorrect current feedback 40% of cases
  2. 2
    Drum overloaded 35% of cases
  3. 3
    Motor winding beginning to fail 20% of cases
  4. 4
    Motor control board fault 5% of cases

How to Fix LG Washing Machine Error Code CE

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Reduce load

    Remove items and restart with half load.

  2. 2

    Power cycle

    Unplug 10 minutes.

  3. 3

    Replace hall sensor

    The hall sensor is the $15–$30 fix that resolves CE in most cases on LG direct-drive washers.

    🔩 LG hall sensor ($15–$30)
    ⚠️ Unplug and lay washer on front to access motor.
  4. 4

    Test and replace motor if needed

    Test stator winding resistance if hall sensor replacement doesn't help.

    🔩 LG stator assembly ($80–$200)

How to Reset Error Code CE

Unplug 10 minutes, reduce load, restart.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full LG washer reset guide → Enter diagnostic mode → Symptom guide: Washer not spinning →

Did this guide fix your appliance?

When to Call a Professional

If hall sensor replacement doesn't resolve CE, the motor or control board needs professional testing.

Average professional repair cost for this issue: $250–$480

Related Error Codes

LE
Motor locked — hall sensor or stator fault
⚠ High Severity
SE
Hall sensor error — motor speed sensor fault
⚠ High Severity

Same Code on Other Brands

Error code CE appears on these other brands too. See every brand that shows CE →

Samsung logo
Samsung Washing Machine CE
Over-current motor protection — motor drawing excessive current

Find Replacement Parts

Use these links to find the exact replacement parts for your LG Washing Machine:

🔩
Search PartSelect
LG Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More LG Washing Machine Error Codes

OE Drainage error — water not draining within expected time UE Unbalanced load — cannot complete spin cycle IE Water inlet error — water not filling within expected time dE Door open or door lock failure tCL Tub clean reminder — drum needs cleaning FE Water overflow error — drum overfilling

Frequently Asked Questions

Can I keep using my LG Washing Machine when error CE appears? +
It is not advisable. The washing machine may still power on, but running it while CE is active can worsen the motor fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes CE on a LG Washing Machine? +
Across reported LG washing machine repairs, the most frequent is hall sensor failure causing incorrect current feedback (40% of cases), drum overloaded (35%), then motor winding beginning to fail (20%). Check them in that order before replacing any parts.
CE keeps coming back after a reset — what should I check next? +
A reset only clears the stored CE fault; if it returns, the motor problem is still present. Move on to the physical checks — reduce load, then power cycle — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.
How much does it cost to fix LG Washing Machine error CE? +
A DIY repair typically runs $15–$200 in parts, versus $250–$480 for a professional service call, so handling it yourself saves around $235. Expect the work to take 1–3 hours.
Which LG Washing Machine models show error CE? +
CE is documented on LG direct-drive front-load and top-load washers, including models such as WM3900HWA, WM4000HBA, WM4500HBA, WM3400CW, WT7300CW, WT7900HBA, and WM8100HVA. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All LG Washing Machine Error Codes ← All LG Error Codes