How to Reset a Kenmore Dishwasher
Cancel/Drain, then a 60-second breaker cycle if needed.
Reset Steps
- 1
Press Cancel — the 2-minute drain clears most soft faults.
- 2
Persistent codes: breaker off 60 seconds, restore, run a short cycle.
💡 Good to know: Float-switch codes need the overfill float checked — reset alone won't clear a raised float.
If the Code Comes Back
A code that returns after a reset means the underlying fault is still present. Look up your exact code for its causes and step-by-step fix:
F2E2 User interface cannot communicate with control board F8E4 Float switch tripped — overfill detected F6E4 Float switch open — water level too low F1E1 Control board memory error — stuck relay or corrupted firmware 4-3 Wash pump communication / motor fault 5-1 Door switch fault — door not detected as latched 6-1 No water detected entering the tub 7-1 Heating element failure — water not reaching temperature
Frequently Asked Questions
Do Whirlpool dishwasher codes apply to my Kenmore? +
If the model number starts with 665, yes — it is a Whirlpool-built machine sharing the same control platform, codes, and parts.