ApplianceErrors.com

Kenmore Dishwasher Error Code F2E2

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 11, 2026
⚠ High Severity 🔧🔧🔧 Advanced DIY Also shown as: 2-2

User interface cannot communicate with control board

The most common cause of the F2E2 error on a Kenmore dishwasher is loose ribbon/harness between UI and control (~40% of cases); start with: power cycle.

💰 DIY cost: $0–$200 👨‍🔧 Pro cost: $200–$400 Save $200+ by doing it yourself
Kenmore Dishwasher error code F2E2 on the display panel
How the F2E2 code appears on a Kenmore dishwasher display

What Does Error Code F2E2 Mean on a Kenmore Dishwasher?

User interface cannot communicate with control board.

F2E2 (displayed as 2-2 on dial models) fires when the main control board loses communication with the user-interface board across the door-console harness. The control expects a data handshake from the touchpad; when that signal drops or is corrupted, the board logs the fault. Unlike F1E1 (control-board self-fault) or F8E4 (a diverter or valve circuit issue), F2E2 points specifically at the UI-to-control link, which is why the console often goes dead or flashes erratically.

Models affected: Kenmore and Kenmore Elite dishwashers built on the Whirlpool control platform, including 665 Series models
What owners report: Owners commonly report the panel going unresponsive or lights flashing randomly, sometimes after moisture reaches the door console. A breaker power cycle occasionally clears a one-time glitch, but many find that reseating or replacing the UI harness or panel is what actually restores communication.

What Causes Error Code F2E2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Loose ribbon/harness between UI and control 40% of cases
  2. 2
    Failed user interface board 30% of cases
  3. 3
    Failed main control board 25% of cases
  4. 4
    Moisture intrusion in door console 5% of cases

How to Fix Kenmore Dishwasher Error Code F2E2

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle

    Kill power at the breaker for 5 minutes and retest.

  2. 2

    Reseat the door console connectors

    Open the inner door panel and reseat the UI-to-control harness.

    ⚠️ Turn off the breaker before opening the door panel.
  3. 3

    Replace the UI board

    If communication doesn't restore, the UI assembly is the more common failure.

    🔩 Kenmore dishwasher UI/control panel ($90–$200)

How to Reset Error Code F2E2

Switch off the breaker for 5 minutes; if F2E2 returns at power-up, a board or harness has failed.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Kenmore dishwasher reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

If both boards seem suspect, a tech with diagnostic mode access can isolate which side failed.

Average professional repair cost for this issue: $200–$400

Related Error Codes

F1E1
Control board memory error — stuck relay or corrupted firmware
⚠ High Severity
F8E4
Float switch tripped — overfill detected
⚠ High Severity

Same Code on Other Brands

Error code F2E2 appears on these other brands too. See every brand that shows F2E2 →

Whirlpool logo
Whirlpool Washing Machine F2E2
User interface communication / keypad fault
Whirlpool logo
Whirlpool Dishwasher F2E2
Keypad error — control panel not communicating

Find Replacement Parts

Use these links to find the exact replacement parts for your Kenmore Dishwasher:

🔩
Search PartSelect
Kenmore Dishwasher repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Kenmore Dishwasher Error Codes

F6E4 Float switch open — water level too low 4-3 Wash pump communication / motor fault 5-1 Door switch fault — door not detected as latched 6-1 No water detected entering the tub 7-1 Heating element failure — water not reaching temperature

Frequently Asked Questions

Can I keep using my Kenmore Dishwasher when error F2E2 appears? +
It is not advisable. The dishwasher may still power on, but running it while F2E2 is active can worsen the control-board fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes F2E2 on a Kenmore Dishwasher? +
Across reported Kenmore dishwasher repairs, the most frequent is loose ribbon/harness between UI and control (40% of cases), failed user interface board (30%), then failed main control board (25%). Check them in that order before replacing any parts.
F2E2 keeps coming back after a reset — what should I check next? +
A reset only clears the stored F2E2 fault; if it returns, the control-board problem is still present. Move on to the physical checks — power cycle, then reseat the door console connectors — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.
How much does it cost to fix Kenmore Dishwasher error F2E2? +
A DIY repair typically runs $0–$200 in parts, versus $200–$400 for a professional service call, so handling it yourself saves around $200. Expect the work to take 1–3 hours.
Which Kenmore Dishwasher models show error F2E2? +
F2E2 is documented on Kenmore and Kenmore Elite dishwashers built on the Whirlpool control platform, including 665 Series models. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 11, 2026.

← All Kenmore Dishwasher Error Codes ← All Kenmore Error Codes