GE Appliances Dishwasher Error Code LE

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026

⚠ Medium Severity 🔧 Easy DIY Also shown as: LF

Long fill — dishwasher not filling within the expected time

The most common cause of the LE error on a GE Appliances dishwasher is supply (saddle) valve closed or partly open (~40% of cases); start with: open the supply valve.

💰 DIY cost: $0–$70 👨‍🔧 Pro cost: $120–$240 Save $120+ by doing it yourself

GE Appliances Dishwasher error code LE on the display panel — How the LE code appears on a GE Appliances dishwasher display

What Does Error Code LE Mean on a GE Appliances Dishwasher?

Long fill — dishwasher not filling within the expected time.

The control monitors fill progress and expects the tub to reach a target water level within a set window, typically judged by the flow meter or a timed fill. When that level isn't reached in time, the board halts the cycle rather than running the pump and heater dry, posting LE (or LF). Unlike a leak or overflow code, this fault points to insufficient incoming water — a closed valve, restricted inlet, or weak solenoid rather than drainage or float problems.

Models affected: GE built-in dishwashers with electronic fill monitoring, including models such as GDF630PSMSS, GDT665SSNSS, and GDP630PYRFS

What owners report: Owners commonly report this code after the supply valve was bumped or partly closed during nearby plumbing work, and simply reopening it often clears the fault. It can also appear falsely when household pressure drops temporarily or a fill hose gets kinked behind the unit after it's been moved for cleaning.

What Causes Error Code LE?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Supply (saddle) valve closed or partly open 40% of cases
2

Inlet hose kinked or screen clogged 30% of cases
3

Low household water pressure 15% of cases
4

Water inlet valve failing 15% of cases

How to Fix GE Appliances Dishwasher Error Code LE

🔧 Easy DIY Est. time: 10–20 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Open the supply valve

Confirm the under-sink water valve is fully open.
2

Check the fill hose and screen

Straighten the hose and clean the inlet screen.
3

Test the inlet valve

If supply is good, test the inlet valve solenoid for continuity.

🔩 GE dishwasher inlet valve ($30–$70)

How to Reset Error Code LE

Open the supply valve and clear any kink, then restart the cycle.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full GE Appliances dishwasher reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

If supply is confirmed and LE persists, replace the water inlet valve.

Average professional repair cost for this issue: $120–$240

Related Error Codes

Water inlet error — inlet valve not operating correctly

⚠ Medium Severity

Drain failure — dishwasher not draining

⚠ High Severity

Same Code on Other Brands

Error code LE appears on these other brands too. See every brand that shows LE →

Samsung Washing Machine LE

Motor locked — drum cannot rotate

Samsung Dishwasher LC

Leak sensor activated — water detected at base of dishwasher

LG Washing Machine LE

Motor locked — hall sensor or stator fault

LG Dishwasher LE

Leakage detected — flood protection activated

Find Replacement Parts

Use these links to find the exact replacement parts for your GE Appliances Dishwasher:

🔩

Search PartSelect

GE Appliances Dishwasher repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More GE Appliances Dishwasher Error Codes

FL Flood switch activated — water in base tray C4 Wash motor failure — circulation pump not running PF Power failure — cycle interrupted by power outage OE Drain error — not draining properly C3 Control board failure C7 OWI sensor failure — optical water indicator fault

Frequently Asked Questions

Can I keep using my GE Appliances Dishwasher when error LE appears? +

You often can for a cycle or two, but the water-supply issue behind LE will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.

What most commonly causes LE on a GE Appliances Dishwasher? +

Across reported GE Appliances dishwasher repairs, the most frequent is supply (saddle) valve closed or partly open (40% of cases), inlet hose kinked or screen clogged (30%), then low household water pressure (15%). Check them in that order before replacing any parts.

LE keeps coming back after a reset — what should I check next? +

A reset only clears the stored LE fault; if it returns, the water-supply problem is still present. Move on to the physical checks — open the supply valve, then check the fill hose and screen — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.

How much does it cost to fix GE Appliances Dishwasher error LE? +

A DIY repair typically runs $0–$70 in parts, versus $120–$240 for a professional service call, so handling it yourself saves around $120. Expect the work to take about 10–20 minutes.

Which GE Appliances Dishwasher models show error LE? +

LE is documented on GE built-in dishwashers with electronic fill monitoring, including models such as GDF630PSMSS, GDT665SSNSS, and GDP630PYRFS. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• GE Appliances Support — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All GE Appliances Dishwasher Error Codes ← All GE Appliances Error Codes