Fisher & Paykel Refrigerator Error Code F2

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 11, 2026

⚠ Medium Severity 🔧🔧 Moderate DIY

Fresh food compartment sensor fault

The most common cause of the F2 error on a Fisher & Paykel refrigerator is failed fresh-food thermistor (~50% of cases); start with: power cycle.

💰 DIY cost: $20–$45 👨‍🔧 Pro cost: $150–$320 Save $130+ by doing it yourself

Fisher & Paykel Refrigerator error code F2 on the display panel — How the F2 code appears on a Fisher & Paykel refrigerator display

What Does Error Code F2 Mean on a Fisher & Paykel Refrigerator?

Fresh food compartment sensor fault.

F2 fires when the control board reads the fresh-food compartment thermistor resistance outside its expected range — either open-circuit (disconnected or broken) or short-circuit (near-zero resistance). Because the board can no longer trust that sensor, it drops into a default run pattern, so cooling continues but temperatures drift from setpoint. It differs from F1, which flags the freezer or evaporator sensor, and from control-board faults where every sensor input reads abnormally. Corroded or loose connectors mimic a failed thermistor.

Models affected: Fisher & Paykel top-mount and bottom-mount refrigerators using the F-series fault codes, including models such as the RF170ADUSX4

What owners report: Owners commonly report F2 appearing after the fridge section starts running warmer or icing unevenly, sometimes intermittently at first. A loose or moisture-corroded connector at the sensor is a frequent false trigger, so reseating the plug before ordering a part is a quick win many report resolves it.

What Causes Error Code F2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

1

Failed fresh-food thermistor 50% of cases
2

Loose or corroded connector 30% of cases
3

Damaged harness in the cabinet 10% of cases
4

Control board input failure 10% of cases

How to Fix Fisher & Paykel Refrigerator Error Code F2

🔧🔧 Moderate DIY Est. time: 30–60 min

⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.

1

Power cycle

Unplug for 5 minutes and watch whether the fault returns at power-up.
2

Test and replace the sensor

Unplug the fridge and measure the compartment sensor; replace if out of spec.

🔩 Fisher & Paykel compartment sensor ($20–$45)

⚠️ Unplug the refrigerator before accessing sensors.
3

Verify temperatures after repair

Give the cabinet 24 hours and confirm the fresh-food zone holds 37–40°F.

How to Reset Error Code F2

Unplug for 5 minutes after the repair to clear the fault.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Did this guide fix your appliance?

When to Call a Professional

Persistent F2 with a good sensor means control-module diagnosis — tech territory.

Average professional repair cost for this issue: $150–$320

Related Error Codes

Freezer compartment sensor fault

⚠ Medium Severity

F40

Fan motor fault — a circulation fan is not running at commanded speed

⚠ High Severity

Same Code on Other Brands

Error code F2 appears on these other brands too. See every brand that shows F2 →

LG Oven F2

Oven over-temperature — exceeded maximum safe temperature

Whirlpool Dryer F02

Keypad / user interface fault — stuck key detected

Whirlpool Oven F2

Oven temperature too high — over-temperature fault

GE Appliances Oven F2

Oven over-temperature — exceeded 590°F in bake or 990°F in self-clean

Find Replacement Parts

Use these links to find the exact replacement parts for your Fisher & Paykel Refrigerator:

🔩

Search PartSelect

Fisher & Paykel Refrigerator repair parts

🔧

Search RepairClinic

Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

Frequently Asked Questions

Can I keep using my Fisher & Paykel Refrigerator when error F2 appears? +

You often can for a cycle or two, but the sensor issue behind F2 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.

What most commonly causes F2 on a Fisher & Paykel Refrigerator? +

Across reported Fisher & Paykel refrigerator repairs, the most frequent is failed fresh-food thermistor (50% of cases), loose or corroded connector (30%), then damaged harness in the cabinet (10%). Check them in that order before replacing any parts.

F2 keeps coming back after a reset — what should I check next? +

A reset only clears the stored F2 fault; if it returns, the sensor problem is still present. Move on to the physical checks — power cycle, then test and replace the sensor — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.

How much does it cost to fix Fisher & Paykel Refrigerator error F2? +

A DIY repair typically runs $20–$45 in parts, versus $150–$320 for a professional service call, so handling it yourself saves around $130. Expect the work to take roughly 30–60 minutes.

Which Fisher & Paykel Refrigerator models show error F2? +

F2 is documented on Fisher & Paykel top-mount and bottom-mount refrigerators using the F-series fault codes, including models such as the RF170ADUSX4. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

• Fisher & Paykel Support — official manufacturer documentation
• Our editorial & verification policy

Content verified against manufacturer service documentation. Last verified: June 11, 2026.

← All Fisher & Paykel Refrigerator Error Codes ← All Fisher & Paykel Error Codes