ApplianceErrors.com

Whirlpool Dryer Error Code F70

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: July 19, 2026
⚠ High Severity 🔧🔧🔧 Advanced DIY

Communication error — no signal between control boards

The most common cause of the F70 error on a Whirlpool dryer is harness between control boards loose/damaged (~45% of cases); start with: power cycle the dryer.

💰 DIY cost: $60–$280 👨‍🔧 Pro cost: $180–$400 Save $120+ by doing it yourself
Whirlpool Dryer error code F70 on the display panel
How the F70 code appears on a Whirlpool dryer display

What Does Error Code F70 Mean on a Whirlpool Dryer?

Communication error — no signal between control boards.

F70 fires when the central control unit stops receiving valid data from the user interface (or motor control) board over their communication link. The control board watches for expected handshake signals; when they drop out or go corrupt, it logs a communication fault. Unlike F71, which points more specifically at the interface side, F70 flags a general loss of signal between boards — most often a loose or damaged inter-board harness rather than an outright board failure.

Models affected: Electronic-control Whirlpool dryers with separate central control and user-interface boards, including Duet/front-load models and console-control top-load units roughly 2010 onward
What owners report: Owners commonly report this code appearing suddenly after a power blip or when the console is bumped, sometimes with an unresponsive display. A simple breaker power-cycle for a minute clears it in many cases; if it keeps returning, reseating the harness connectors is the usual quick win before suspecting a board.

What Causes Error Code F70?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Harness between control boards loose/damaged 45% of cases
  2. 2
    User interface board fault 25% of cases
  3. 3
    Central control board fault 20% of cases
  4. 4
    Power surge 10% of cases

How to Fix Whirlpool Dryer Error Code F70

🔧🔧🔧 Advanced DIY Est. time: 1–3 hours
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle the dryer

    Turn off the breaker for one minute, then restart.

  2. 2

    Reseat the inter-board harness

    Open the console and reseat the connectors between the central control and user interface boards.

    ⚠️ Unplug the dryer before opening the console.
  3. 3

    Replace the faulty board

    If reseating fails, replace the user interface or central control board as diagnosed.

    🔩 Whirlpool dryer user interface ($60–$180) 🔩 Whirlpool dryer control board ($120–$280)

How to Reset Error Code F70

Power down at the breaker for one minute. If F70 returns, reseat the inter-board harness.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Whirlpool dryer reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

If the harness is sound, board-level diagnosis is best handled by a technician.

Average professional repair cost for this issue: $180–$400

Related Error Codes

F71
Communication error — user interface not responding
⚠ High Severity

Same Code on Other Brands

Error code F70 appears on these other brands too. See every brand that shows F70 →

Miele logo
Miele Dishwasher F70
Flow meter fault — water quantity sensor failure
Kenmore logo
Kenmore Dryer F70
Communication failure between control boards
KitchenAid logo
KitchenAid Dryer F70
Communication failure between main control and user interface

Find Replacement Parts

Use these links to find the exact replacement parts for your Whirlpool Dryer:

🔩
Search PartSelect
Whirlpool Dryer repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Whirlpool Dryer Error Codes

F01 Main control board failure F22 Outlet thermistor failure F30 Restricted airflow — vent blockage F26 Drive motor failure F28 Moisture sensor bar failure — primary sensor F29 Moisture sensor bar failure — secondary sensor

Frequently Asked Questions

Can I keep using my Whirlpool Dryer when error F70 appears? +
It is not advisable. The dryer may still power on, but running it while F70 is active can worsen the control-board fault or damage related parts. Treat it as a soon-as-possible repair.
What most commonly causes F70 on a Whirlpool Dryer? +
Across reported Whirlpool dryer repairs, the most frequent is harness between control boards loose/damaged (45% of cases), user interface board fault (25%), then central control board fault (20%). Check them in that order before replacing any parts.
F70 keeps coming back after a reset — what should I check next? +
A reset only clears the stored F70 fault; if it returns, the control-board problem is still present. Move on to the physical checks — power cycle the dryer, then reseat the inter-board harness — since the code will reappear until the root cause is resolved. This is an advanced repair involving deeper disassembly or electrical testing.
How much does it cost to fix Whirlpool Dryer error F70? +
A DIY repair typically runs $60–$280 in parts, versus $180–$400 for a professional service call, so handling it yourself saves around $120. Expect the work to take 1–3 hours.
Which Whirlpool Dryer models show error F70? +
F70 is documented on Electronic-control Whirlpool dryers with separate central control and user-interface boards, including Duet/front-load models and console-control top-load units roughly 2010 onward. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: July 19, 2026.

← All Whirlpool Dryer Error Codes ← All Whirlpool Error Codes