ApplianceErrors.com

Samsung Washing Machine Error Code tE2

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 11, 2026
⚠ Medium Severity 🔧🔧 Moderate DIY

Duct/outlet temperature sensor error (washer-dryer combo models)

The most common cause of the tE2 error on a Samsung washing machine is secondary thermistor failed (~50% of cases); start with: power cycle.

💰 DIY cost: $15–$40 👨‍🔧 Pro cost: $150–$280 Save $135+ by doing it yourself
Samsung Washing Machine error code tE2 on the display panel
How the tE2 code appears on a Samsung washing machine display

What Does Error Code tE2 Mean on a Samsung Washing Machine?

Duct/outlet temperature sensor error (washer-dryer combo models).

tE2 reports a fault in the secondary temperature sensor rather than the main wash-heater thermistor tracked by tE1. On combo and steam models this thermistor monitors the duct or condensing path, so the control board fires tE2 when it reads an open circuit, a short, or a temperature value outside the plausible range. It distinguishes itself from tE1/tE3 by pointing to that secondary sensing location, which is more exposed to lint and condensation.

Models affected: Washer-dryer combo and steam-capable models with a secondary duct/condensing-path thermistor, such as the WV60M9900AV; standard front-load and top-load washers without a drying circuit rarely show this code
What owners report: Owners commonly report this code surfacing partway through drying or steam cycles rather than at startup, and a simple power cycle sometimes clears a one-off glitch. Lint buildup or moisture on the sensor can occasionally cause a false trigger, so cleaning and reseating the connector is often the quick win before replacing the thermistor.

What Causes Error Code tE2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Secondary thermistor failed 50% of cases
  2. 2
    Connector corrosion or chafed wiring 30% of cases
  3. 3
    Lint or moisture on the sensor (combo models) 10% of cases
  4. 4
    Control board sensing fault 10% of cases

How to Fix Samsung Washing Machine Error Code tE2

🔧🔧 Moderate DIY Est. time: 30–60 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Power cycle

    Unplug for 5 minutes; a one-off reading glitch will clear.

  2. 2

    Inspect the sensor harness

    Trace the wiring to the duct/secondary sensor and reseat the connector; look for green corrosion or pinched wires.

    ⚠️ Unplug the washer before opening the cabinet.
  3. 3

    Replace the secondary thermistor

    Measure resistance at room temperature; replace if open or shorted.

    🔩 Samsung thermistor ($15–$35)

How to Reset Error Code tE2

Unplug the unit for 5 minutes and restart the cycle.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Samsung washer reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

If the sensor tests good and tE2 persists, the main board needs professional diagnosis.

Average professional repair cost for this issue: $150–$280

Related Error Codes

tE1
Water temperature sensor (thermistor) error — heater thermistor out of range
⚠ Medium Severity
tE3
Condenser/steam temperature sensor error
⚠ Medium Severity

Same Code on Other Brands

Error code tE2 appears on these other brands too.

LG logo
LG Dryer tE1
Thermistor error — air temperature sensor out of range

Find Replacement Parts

Use these links to find the exact replacement parts for your Samsung Washing Machine:

🔩
Search PartSelect
Samsung Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Samsung Washing Machine Error Codes

4C Water supply not detected UE Unbalanced load detected OE Drain failure — water not draining LE Motor locked — drum cannot rotate DE Door not properly closed or door lock failure HE Water heater error — water not heating to target temperature

Frequently Asked Questions

Can I keep using my Samsung Washing Machine when error tE2 appears? +
You often can for a cycle or two, but the temperature issue behind tE2 will keep interrupting normal operation until it is fixed. Plan the repair rather than ignoring the code.
What most commonly causes tE2 on a Samsung Washing Machine? +
Across reported Samsung washing machine repairs, the most frequent is secondary thermistor failed (50% of cases), connector corrosion or chafed wiring (30%), then lint or moisture on the sensor (combo models) (10%). Check them in that order before replacing any parts.
tE2 keeps coming back after a reset — what should I check next? +
A reset only clears the stored tE2 fault; if it returns, the temperature problem is still present. Move on to the physical checks — power cycle, then inspect the sensor harness — since the code will reappear until the root cause is resolved. This is a moderate job — a multimeter and some disassembly are usually involved.
How much does it cost to fix Samsung Washing Machine error tE2? +
A DIY repair typically runs $15–$40 in parts, versus $150–$280 for a professional service call, so handling it yourself saves around $135. Expect the work to take roughly 30–60 minutes.
Which Samsung Washing Machine models show error tE2? +
tE2 is documented on Washer-dryer combo and steam-capable models with a secondary duct/condensing-path thermistor, such as the WV60M9900AV; standard front-load and top-load washers without a drying circuit rarely show this code. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 11, 2026.

← All Samsung Washing Machine Error Codes ← All Samsung Error Codes