ApplianceErrors.com

Samsung Washing Machine Error Code bE2

Reviewed by the ApplianceErrors Editorial Team · Verified against manufacturer service documentation · Last verified: June 10, 2026
✓ Low Severity 🔧 Easy DIY Also shown as: bE3

Specific button on control panel shorted

The most common cause of the bE2 error on a Samsung washing machine is button stuck from detergent splash (~50% of cases); start with: identify and press the stuck button.

💰 DIY cost: $0–$150 👨‍🔧 Pro cost: $100–$250 Save $100+ by doing it yourself
Samsung Washing Machine error code bE2 on the display panel
How the bE2 code appears on a Samsung washing machine display

What Does Error Code bE2 Mean on a Samsung Washing Machine?

Specific button on control panel shorted.

The control board continuously scans the button matrix on the control panel. bE2 and bE3 fire when the board reads a specific button as held down for longer than a valid press, indicating a short in that key's input line. Unlike the generic bE code, these variants identify which individual button is stuck. The most common trigger is detergent or moisture bridging the membrane contacts, distinguishing a cleanable fault from a failed UI board that reads the input as permanently closed.

Models affected: Samsung washers with electronic touch/button control panels, both front-load and top-load models across recent generations
What owners report: Owners commonly report this code appearing after a cycle where detergent or water splashed onto the panel, and many find that wiping the panel and firmly pressing each button clears it. It can also be falsely triggered by residual moisture, so letting the panel dry after unplugging often resolves it without any parts.

What Causes Error Code bE2?

Here are the most common causes in order of frequency. Start with the most likely cause before moving to the next:

  1. 1
    Button stuck from detergent splash 50% of cases
  2. 2
    Membrane keypad failure at specific button 35% of cases
  3. 3
    UI board key input shorted 15% of cases

How to Fix Samsung Washing Machine Error Code bE2

🔧 Easy DIY Est. time: 10–20 min
⚡ Safety first: Unplug the appliance before opening any panels or touching internal components.
  1. 1

    Identify and press the stuck button

    Press each button around the display firmly. A stuck button will feel different.

  2. 2

    Clean the control panel

    Wipe with a dry cloth, paying attention to button edges where detergent residue accumulates.

  3. 3

    Replace the UI board

    If a button remains stuck after cleaning.

    🔩 Samsung washer UI board ($60–$150)

How to Reset Error Code bE2

Unplug 5 minutes. If a stuck button is cleared, code should not return.

Note: If the error returns after resetting, the underlying issue has not been resolved. Work through the fix steps above.

Full Samsung washer reset guide → Enter diagnostic mode →

Did this guide fix your appliance?

When to Call a Professional

If UI board replacement doesn't resolve bE2/bE3, the main control board keypad interface has failed.

Average professional repair cost for this issue: $100–$250

Related Error Codes

bE
Button error — key stuck or shorted
✓ Low Severity

Find Replacement Parts

Use these links to find the exact replacement parts for your Samsung Washing Machine:

🔩
Search PartSelect
Samsung Washing Machine repair parts
🔧
Search RepairClinic
Step-by-step video guides

External links — ApplianceErrors.com is not affiliated with these retailers.

More Samsung Washing Machine Error Codes

4C Water supply not detected UE Unbalanced load detected OE Drain failure — water not draining LE Motor locked — drum cannot rotate DE Door not properly closed or door lock failure HE Water heater error — water not heating to target temperature

Frequently Asked Questions

Can I keep using my Samsung Washing Machine when error bE2 appears? +
Usually yes — bE2 is a low-severity control-panel notice that rarely stops the washing machine from working, but clearing the underlying cause prevents it from escalating.
What most commonly causes bE2 on a Samsung Washing Machine? +
Across reported Samsung washing machine repairs, the most frequent is button stuck from detergent splash (50% of cases), membrane keypad failure at specific button (35%), then uI board key input shorted (15%). Check them in that order before replacing any parts.
bE2 keeps coming back after a reset — what should I check next? +
A reset only clears the stored bE2 fault; if it returns, the control-panel problem is still present. Move on to the physical checks — identify and press the stuck button, then clean the control panel — since the code will reappear until the root cause is resolved. This is a beginner-friendly job needing only basic hand tools.
How much does it cost to fix Samsung Washing Machine error bE2? +
A DIY repair typically runs $0–$150 in parts, versus $100–$250 for a professional service call, so handling it yourself saves around $100. Expect the work to take about 10–20 minutes.
Which Samsung Washing Machine models show error bE2? +
bE2 is documented on Samsung washers with electronic touch/button control panels, both front-load and top-load models across recent generations. Other units sharing the same control platform can display it too, so the fixes here generally transfer across the series.

Sources & References

Content verified against manufacturer service documentation. Last verified: June 10, 2026.

← All Samsung Washing Machine Error Codes ← All Samsung Error Codes