How to Reset a Kenmore Washing Machine
60-second power-cycle works across all builders.
Reset Steps
- 1
Unplug for 60 seconds.
- 2
Restore power; dial models get a full counterclockwise knob rotation first.
- 3
Run Drain & Spin to confirm.
💡 Good to know: F21 on 110-prefix models: the coin-trap filter behind the lower front panel is almost always the fix — clean it before any reset attempt.
If the Code Comes Back
A code that returns after a reset means the underlying fault is still present. Look up your exact code for its causes and step-by-step fix:
F21 Slow drain — pump is draining but too slowly F20 Water supply error — no water detected OE Drain error (LG-platform Kenmore models) LE Motor locked (LG-platform Kenmore models) UE Unbalanced load (LG-platform Kenmore models) IE Water inlet error (LG-platform Kenmore models) F1 Primary control board fault — board failed self-check
Frequently Asked Questions
Who makes my Kenmore washer? +
The model-number prefix tells you: 110 = Whirlpool, 796 = LG, 417 = Frigidaire. Use the builder brand's error-code documentation and parts.