How to Reset a GE Appliances Refrigerator

Unplug for 60 seconds. Give cooling 2–4 hours to stabilize before re-checking.

Reset Steps

1
Unplug or breaker-off for 60 seconds.
2
Restore power; compressor restart may delay a few minutes.
3
Re-check the display after a few hours of run time.

💡 Good to know: Repeated dS codes with frost accumulating on the freezer back wall confirm a real defrost-circuit failure.

If the Code Comes Back

A code that returns after a reset means the underlying fault is still present. Look up your exact code for its causes and step-by-step fix:

dS Defrost sensor issue — freezer not defrosting correctly 1E Freezer compartment temperature sensor failure 88 Demo/showroom mode active — cooling is disabled 2E Fresh food compartment temperature sensor failure 4E Evaporator sensor failure 6E Humidity/ambient sensor failure

See all 6 GE Appliances refrigerator error codes →

Frequently Asked Questions

Why does my GE fridge display show 88? +

88 with all segments lit is the display self-test — common after power interruptions. Power-cycle for 60 seconds; if it persists, the display or main board has a fault.

How to Enter GE Appliances Refrigerator Diagnostic Mode → ← All GE Appliances Refrigerator Error Codes